Aluminum Honeycomb Core Hot Press Machine
The machine use the conduction oil for heating, heating design with subsection, low energy consumption, heat conduction uniformity, auto pressure maintaining and heat preservation. Designed as three board two press, the aluminum honeycomb core plate can be bonding good, flatness, no deformation after press.
Features: Hot press plate made of high quality carbon structural steel, the surface fine abrasive machining, the planeness is less than 0.06mm; surface roughness of 1.6; maximum thickness deviation of lead extrusion test is 0.2mm; insulation uniform temperature within the ± 3 ℃ for deviation scope; the imported late-model new seals for the master cylinder, no leaks, and tiny running resistance; adjustable for the hydro-cylinder rising velocity; can make sure the Honeycomb panel with excellent adhesion and flat surface and non-deformation.
Heating System: Well-segmented design, low energy consumption, heat conduction uniformity, temperature adjustable; insulation uniform of temperature within the ± 3 ℃ for the deviation
Hydraulic system: the main hydraulic original are imported parts, pressure adjustable.
Hydro-cylinder: Fabricated with precision CNC machining, imported oil seals, no oil leakage phenomenon
Auto-Control: Simply press the button to complete the pressure plate rise, closed, pressure-adding, holding pressure, time, pressing descend and the entire procedure